Solar Fan With LED Light Direct From Factory
One solar panel, one battery, one kit — fan airflow and LED lighting running from the same system.
The solar fan with LED light is the highest-margin configuration in our fan line, built for solar home kit programs, rural household retail, and NGO supply channels. Battery capacity is sized for the combined fan + LED load at the design stage, not as an afterthought.
Solar Fan With LED Light for Off-Grid SKU Programs
A solar fan with LED light is a single kit — fan motor, LED array, solar panel, battery pack, and controller — where both the fan and the light draw from the same energy system. That's the commercial case for this configuration: one SKU replaces two separate purchases in off-grid household channels, and one solar panel and battery system covers both functions instead of two.
The Solar Fans category page covers the full product family overview. This page focuses on the LED-integrated configuration specifically — what makes it different from a fan-only solar kit, which market segments it fits, and what specs to confirm before you lock an order.
The distinction matters because a solar fan with light is not a fan with an LED bulb attached. The battery must be sized for the combined motor and LED load running simultaneously. If it isn't, runtime drops below what either function would deliver independently, and your buyers file warranty claims within the first month. We've seen that failure mode often enough that we treat combined-load battery sizing as the primary engineering decision on this product, not a secondary spec.
One SKU, Two Functions
One solar panel and battery system covers both fan airflow and LED lighting — replacing two separate purchases in off-grid household channels.
Battery Sized for Combined Load
The battery is engineered for simultaneous fan + LED draw from day one — not a fan-only pack with a light bolted on.
Combined Fan + LED Load Is the Spec That Protects Runtime Claims
This is the section most product pages skip, and it's the one that determines whether your buyers get the runtime they were promised or return the product after the first week.
The Runtime Failure Mode
A typical solar fan with LED light runs a brushless DC motor drawing 10–15W and an LED array drawing 3–8W. Running both simultaneously means the battery is supplying 13–23W continuously. If the battery was sized for the fan load alone — say, a 10Ah pack for a 10W motor — adding the LED load cuts runtime by 30–40% compared to what the spec sheet implies.
The buyer's customers notice immediately. The return rate tells the story.
Battery Sizing for Combined Load
We size battery capacity for the combined load at the design stage. For a 10W motor and a 5W LED array running simultaneously, we calculate the combined draw, apply an efficiency factor for the controller and wiring losses (typically 10–15%), and size the battery to deliver the target runtime at that combined load.
A 15Ah LiFePO4 pack at 15W combined draw gives roughly 8–9 hours of runtime accounting for efficiency losses — that's the number we put on the spec sheet, not the theoretical maximum under no-load conditions.
Panel Sizing Logic
The panel must cover the combined motor and LED load during peak sun hours plus charge the battery to full capacity within a standard 6–8 hour solar window. For a 15W combined load with a 15Ah battery, a 25W panel is the practical minimum for most markets.
For lower-irradiance markets — Northern Europe, high-latitude North America — we recommend 30W to maintain reliable daily charging through winter months. We've shipped this configuration to Scandinavia and the UK. The buyers who specified 20W panels came back with runtime complaints after the first autumn. The ones who took our 30W recommendation didn't.
Combined-Load Sizing Reference
| Parameter | Standard Market | Low-Irradiance Market |
|---|---|---|
| Motor Draw | 10–15W | 10–15W |
| LED Array Draw | 3–8W | 3–8W |
| Combined Simultaneous Load | 13–23W | 13–23W |
| Efficiency Loss Factor | 10–15% | 10–15% |
| Battery (example) | 15Ah LiFePO4 | 15Ah LiFePO4 |
| Runtime at 15W Combined | ~8–9 hours | ~8–9 hours |
| Minimum Panel Size | 25W | 30W recommended |
Controller Protection & Pre-Production Testing
The controller protection suite — over-charge, over-discharge, short-circuit, and reverse polarity — is standard on all battery-backed models. Combined-load testing is part of our pre-production sign-off: we run the fan and LED simultaneously at rated load for a full discharge cycle before approving the production batch.
If the runtime doesn't match the spec, we adjust the battery capacity before production starts, not after the first container ships.
For a detailed comparison of battery-backed vs direct solar fan configurations, see Solar Fan With Battery vs Direct Solar Fan.
Quote Your Solar Fan With LED Light Configuration
Include your target runtime, market, and whether you need fan-only or simultaneous fan + LED operation.
Request a QuoteOrder-Ready Specifications Buyers Should Confirm Before RFQ
The table below covers typical specification ranges for our solar fan with LED light configurations. These are industry-typical values — exact specs depend on the model and configuration you select. Confirm final specs during quotation.
| Specification | Typical Range | Notes |
|---|---|---|
| Fan diameter | 8 inch – 16 inch | 10–12 inch is the most common for household and kit programs |
| DC motor type | Brushless DC (BLDC) | Brushed DC available for price-sensitive programs; we flag the trade-off |
| Motor power | 8W – 20W | Matched to fan diameter and airflow target |
| Fan speed settings | 2–3 speeds | Remote control or manual switch; oscillation optional |
| LED wattage | 3W – 8W | Higher wattage for primary lighting; lower for supplemental ambient light |
| LED color temperature | 3000K – 6500K | Warm white through daylight; custom CCT on OEM runs |
| LED lumen output | 200 lm – 600 lm | Confirmed at assembly stage; lumen binning applied |
| Battery chemistry | LiFePO4 (preferred), Li-ion | LiFePO4 for longer cycle life; Li-ion for lower cost and weight |
| Battery capacity | 10Ah – 20Ah | Sized for combined motor + LED load at target runtime |
| Solar panel wattage | 20W – 40W | Matched to combined load + battery charging requirement |
| Panel cable length | 3m – 5m | Longer cable available for rooftop or elevated panel placement |
| Runtime (fan + LED) | 6 hours – 10 hours | At rated combined load; confirmed by combined-load test |
| Charging method | Solar only; solar + USB-C; solar + AC adapter | Multi-input available for household and emergency kit programs |
| Controller protection | Over-charge, over-discharge, short-circuit, reverse polarity | Standard on all battery-backed models |
| Housing material | ABS plastic body; ABS + metal grille | Grille impact-tested; stand load-tested |
| IP suitability | IP20 (indoor); IP44 (semi-outdoor) | Confirm IP requirement for your deployment environment |
| Carton contents | Fan unit, solar panel, battery pack, cable, LED module (if separate), remote/switch, mounting hardware, manual — accessory checklist verified per carton at outgoing inspection | |
Specifications shown are industry-typical values for this product type. Actual specifications vary by model and configuration. Contact JXSOL to confirm specifications for your target SKU.
For guidance on selecting panel wattage and battery capacity for your market, see How to Choose a Solar Powered Fan.
Market Segments Where a Fan and Light Kit Can Carry Higher Margin
The solar fan and light kit is not a general-purpose SKU. It earns its margin in specific channels where the combined function justifies a higher price point than a fan-only product. Here's where our buyers are actually moving volume.
Solar Home System Distributors and Rural Electrification Programs
This is the primary commercial channel for the solar fan with LED light. Distributors supplying off-grid households in sub-Saharan Africa, rural Southeast Asia, and parts of the Middle East sell this kit as a two-function essential: cooling and basic lighting from one solar system. The per-household cost is lower than sourcing a fan and a light separately, which makes the kit easier to sell at the retail level and easier to justify in program budgets.
Order patterns in this segment tend toward volume and program timelines — 500 to 5,000 units per run, with reorders tied to distribution program cycles rather than seasonal demand. Lead time reliability matters more than unit price in this channel.
If your program has a deployment window, a supplier who misses the shipment date costs you more than a supplier who charges 5% more per unit. We schedule production in advance and communicate schedule changes before they become your problem.
NGO and Humanitarian Supply Programs
Procurement organizations sourcing for disaster relief, refugee settlement, and field operations need a solar fan and light kit that works without grid infrastructure, survives rough handling, and comes with documentation for import clearance. CE Declaration of Conformity, RoHS test reports, and IP test certificates are the entry requirements for most humanitarian procurement frameworks.
We've supplied this channel through our solar lighting programs and can extend the same documentation package to solar fan with LED light orders. The kit format — one panel, one battery, one system for two functions — also simplifies field installation and reduces the number of components that can be lost or damaged in transit.
Field insight: NGO buyers have told us that accessory completeness is a bigger field problem than product failure. A missing panel cable or mounting bracket grounds the whole kit. Our accessory checklist at outgoing inspection exists partly because of that feedback.
Emergency Preparedness and Backup Power Retail
Distributors in North America and Europe source solar fan with light kits for emergency preparedness retail — hardware chains, outdoor retailers, and direct-to-consumer emergency kit programs. The multi-input charging option (solar + USB-C + AC adapter) is the key spec for this channel: buyers want a kit that charges from the grid under normal conditions and switches to solar when the grid goes down.
This segment is more price-sensitive than the rural electrification channel, but the multi-function value proposition supports a higher retail price than a fan-only or light-only solar product.
Retail packaging, English-language manuals, and UPC labeling are the standard requirements. We handle all three through our OEM/ODM program.
Mixed Solar Catalog Programs Alongside Solar Lighting
Distributors already sourcing from our core solar street and roadway lighting catalog add the solar fan with LED light to broaden their offering without adding a supplier. The kit is a natural complement to solar home lighting products — same buyer, same channel, same factory relationship.
Solar fans with LED light typically represent 10–20% of the order value in a mixed catalog program, with solar lighting as the anchor.
Consolidation advantage: One container, one set of documentation, one point of contact for reorders. If you're already running a solar lighting program with us, adding this SKU doesn't add sourcing complexity.
Quality Checks for Battery, Panel, LED Module, and Accessory Completeness
The solar fan with LED light has more failure points than a fan-only product because it combines a motor system, an LED system, a battery system, and a solar charging system in one kit. Each of those systems can fail independently, and the combined-load interaction adds a fifth failure mode that doesn't exist in single-function products.
Stage 1: Incoming Inspection
- Battery cells — capacity and internal resistance matching
- Solar panels — electrical output against rated wattage
- LED chips and modules — lumen output and color temperature binning
- DC motors — load testing at rated speed
- Controllers — protection function verification
- Housings — structural and grille impact check
Components that don't pass incoming inspection don't enter the production floor.
Stage 2: In-Process Inspection
- Motor assembly checkpoint
- Battery pack integration
- LED module assembly — lumen output and color temperature confirmed before final assembly
- Controller wiring stage
Color temperature mismatch is caught at the LED module stage — not after the product is packed. Battery capacity is confirmed by capacity testing, not by cell count or nominal rating.
Stage 3: Combined-Load Test
- Fan and LED running simultaneously at rated load for a full discharge cycle
- Runtime verified against spec
- Fan speed and LED brightness must not degrade during discharge
- Controller protection functions trigger correctly at low-battery threshold
Runs on every production batch before sign-off — not on a sample basis.
Stage 4: Outgoing Inspection
100% inspection — every unit, every carton, every accessory pack.
Accessory checklist verified against packing list:
- Panel
- Battery (if external)
- Cable
- LED module (if separate)
- Remote or switch
- Mounting hardware
- Manual
A missing accessory at the buyer's warehouse costs more to resolve than the part itself.
Same QC System as Our Solar Lighting Lines
The JXSOL factory quality system — 12,000 m² facility, 6 production lines, 15+ optical and electrical engineers, automated SMT, and 100% pre-shipment inspection — is the same system that covers our solar lighting products. Solar fans with LED light go through the same checkpoints, not a lighter version.
12,000
m² Facility
6
Production Lines
15+
Engineers
100%
Pre-Shipment Inspection
OEM/ODM Options for Private-Label Solar Fan With Light Programs
If you're building a private-label solar fan with light line or need a configuration that doesn't match our standard catalog, we handle that through our OEM/ODM program. The engineering team reviews the spec before production to confirm the configuration is achievable and to lock the spec before component procurement.
Branding
Logo on fan housing, grille, solar panel, and battery pack. Custom carton design and printing. User manual in your language and format.
Fan Configuration
- Fan diameter: 8–16 inch
- Blade count: configurable
- Motor power: selectable
- Speed settings: 2–3 speeds
- Oscillation: optional
- Timer function: optional
LED Configuration
- LED wattage: 3–8W
- Color temperature: 3000K–6500K
- Lumen output: configurable
- Dimming levels: selectable
- On/off control independent from fan
Battery
- Chemistry: LiFePO4 or Li-ion
- Capacity: 10–20Ah
- Cell brand specification on OEM runs
Solar Panel
- Wattage: 20–40W
- Panel dimensions: configurable
- Cable length: 3–5m (longer available)
- Mounting bracket style: selectable
Charging Input
- Solar-only
- Solar + USB-C
- Solar + AC adapter
- Multi-input configuration
Housing Color
Standard colors from existing tooling available from 100 units. Custom colors on runs over 500 units.
Accessory Kit
- Remote control
- Carry bag
- Replacement fuse
- Instruction card
- Mounting hardware configuration
Carton & Packaging
- Retail box design
- Inner carton configuration
- Master carton labeling
- Mixed-SKU carton packing
Order Minimums
Standard Catalog Models
Available from 100 units with standard color options from existing tooling.
OEM/ODM Custom Specifications
Custom battery capacity, custom panel wattage, custom LED configuration, private label — goes through engineering review before production.
Custom Housing Colors
Minimum 500 units — the powder line changeover cost doesn't make sense for either side below that threshold.
Spec Lock Process
Custom specs must be locked before we source components. Changes after procurement affect lead time and cost.
Color note for 100–499 unit programs: If your program is in the 100–499 unit range and you need a specific color, we'll tell you what's available from current tooling before you commit. Standard color options from existing tooling are available from 100 units.
Start Your OEM Solar Fan With LED Light Inquiry
For buyers adding solar fans to an existing solar lighting OEM program, see our OEM and ODM solar lighting services for the full scope of what we support.
Include: target market, fan size, LED wattage, runtime target, panel size, battery preference, charging method, packaging, branding, and quantity.
Packing and Documentation That Reduce After-Sales Cost
A solar fan and light kit ships with more accessories than most solar lighting products: fan body, solar panel, battery pack (if external), panel cable, LED module (if separate from fan body), remote control or manual switch, mounting hardware, and instruction manual. Accessory control is where packing errors happen, and a missing panel cable or mounting bracket creates a customer service problem that costs more to resolve than the part itself.
Carton Layout
Fan unit, solar panel (foam-wrapped and flat-packed or in a dedicated sleeve), battery pack, cable, and accessories packed in a defined sequence with a packing list inside every carton. Carton dimensions are sized for container loading efficiency — CBM per carton and loading quantities are confirmed during quotation based on your selected configuration.
Panel Protection
Solar panels are wrapped in foam and packed flat or in a reinforced sleeve to prevent glass cracking during transit. For panels 25W and above, we use reinforced carton walls and corner protection. We've had panels arrive cracked from suppliers who packed them loose in the carton — we added the foam sleeve after seeing that failure mode in incoming inspection on panels we were evaluating from a new supplier.
Accessory Verification
Every carton is checked against the accessory packing list before sealing. The packing list is included inside the carton so your receiving team can verify completeness on arrival. Batch codes on every carton trace back to production records for QC traceability.
Documentation for Regulated Markets
CE Declaration of Conformity, RoHS test reports, and IP test certificates are available with the order for markets that require them. If your market has specific import documentation requirements, confirm them during quotation so we prepare the package before the container closes.
Mixed-SKU Consolidation
If you're ordering solar fans with LED light alongside other solar fan families or solar lighting products, we consolidate into a single container with a master packing list. One shipment, one set of documentation.
Choose the Right Solar Fan SKU Before You Lock the Order
The solar fan with LED light is the right configuration if you need one solar system to cover both airflow and basic lighting. If your channel has a different primary need, one of the sibling products may be a better commercial fit.
| Product | Best Commercial Fit | Key Differentiator |
|---|---|---|
| Solar Fan With LED Light | Solar home kits, rural household retail, NGO supply, emergency kits | Combined fan + LED on one battery system; highest-margin configuration |
| Solar Powered Fan | Buyers who need confirmed panel wattage, battery capacity, and runtime specs for fan-only use | Defined performance data; fan-only load simplifies battery sizing |
| Solar Stand Fan | Household retail and reseller programs where the pedestal form factor is the selling point | Familiar stand-fan form factor with solar integration |
| Portable Solar Fan | Camping retail, emergency preparedness kits, compact outdoor programs | Lightweight, compact, designed for retail packaging and easy transport |
| Solar Exhaust Fan | Attic, greenhouse, warehouse, and small building ventilation channels | Daytime-only direct solar operation; galvanized steel housing for outdoor durability |
| Solar Fans | Distributors building a broad solar fan catalog across multiple configurations | Widest SKU range for mixed-configuration programs |
If you're not sure which configuration fits your market, send us your target channel, runtime requirement, and order volume — we'll recommend the right SKU based on what's moving for our existing distributors in your region.
Solar Fan With LED Light FAQ for Procurement Decisions
Technical answers to the sizing and specification questions that come up most often during RFQ review for combined fan-and-light solar kits.
How do I size the battery for a solar fan with LED light running both functions simultaneously?
How do I size the battery for a solar fan with LED light running both functions simultaneously?
Add the motor wattage and LED wattage to get the combined load. Apply a 10–15% efficiency factor for controller and wiring losses to get the actual draw. Then size the battery to deliver your target runtime at that draw.
Worked Example
We confirm the calculation during quotation based on your target runtime and market.
Key rule: Never size the battery for the fan load alone and treat the LED as a bonus — that's the most common cause of runtime complaints in this product category.
What solar panel wattage do I need for a solar fan and light kit?
What solar panel wattage do I need for a solar fan and light kit?
The panel must cover the combined motor and LED load during peak sun hours and charge the battery to full capacity within a standard 6–8 hour solar window.
Practical Rule
Panel wattage should be 1.5–2× the combined load.
Southeast Asia, Middle East, Sub-Saharan Africa
For a 15W combined load, a 25W panel is the minimum.
Northern Europe, High-Latitude North America
Size toward 30–35W to maintain reliable daily charging through winter months.
We confirm panel sizing during quotation based on your target market and runtime requirement.
Is the solar fan with LED light suitable for solar home system programs?
Is the solar fan with LED light suitable for solar home system programs?
Yes, and it's one of the stronger SKUs for that channel. One solar panel and battery system covers both airflow and basic lighting, which reduces the per-household cost compared to sourcing a fan and a light separately. The configuration also simplifies installation — one panel, one battery, one system.
Key spec to confirm
Battery capacity must be sized for the combined fan + LED load, not just the fan alone. We size battery capacity for the combined load at the design stage.
For rural electrification and NGO supply programs, CE and RoHS documentation is available with the order.
What certifications does the solar fan with LED light carry?
What certifications does the solar fan with LED light carry?
Our manufacturing facility holds ISO 9001:2015, CE, and RoHS certifications. CE Declaration of Conformity and RoHS test reports are available with the order for markets that require them.
ISO 9001:2015
CE Certified
RoHS Compliant
IEC 62124 covers photovoltaic standalone system testing and is referenced in our solar panel testing protocols. IP rating depends on the specific model — indoor configurations are typically IP20; semi-outdoor configurations are IP44.
If your market or channel requires a specific IP rating or additional certification documentation, confirm during quotation and we'll prepare the package before the container closes.
What is the MOQ for solar fan with LED light, and can I order a private-label version?
What is the MOQ for solar fan with LED light, and can I order a private-label version?
Standard catalog models are available from 100 units — low enough to test a new SKU with your customers before committing to a larger program.
Private-label and OEM/ODM programs with custom specifications (battery capacity, panel wattage, LED configuration, housing color, branding, packaging) go through an engineering review before production. MOQ for custom configurations is confirmed based on the spec after the engineering review.
Ready to get specific pricing?
Submit your target configuration and quantity to receive a confirmed MOQ and lead time.
Request a Quote
Why does runtime vary so much between solar fan with light products on the market?
Why does runtime vary so much between solar fan with light products on the market?
Three root causes cover most of the variation:
Battery capacity mismatch
The spec sheet shows 15Ah but the actual cells test at 10–11Ah, so runtime is 25–30% below spec from day one.
Runtime specified at fan-only load
The seller tested runtime with the LED off, then published that number as the product runtime.
Panel under-sizing
The panel can't fully recharge the battery in a normal day, so each cycle starts with less charge than the previous one — runtime degrades progressively over weeks.
How we address each cause
- Battery capacity testing on every batch — eliminates mismatch between spec and actual Ah.
- Runtime specified at combined fan + LED load — the number you see is the number you get with both running.
- Panel output testing against rated wattage and panel sizing matched to the combined load — full recharge in a normal solar day.
Send the Target Runtime, Panel Size, and Order Volume
If you're sourcing a solar fan with LED light for a solar home kit program, rural household retail, NGO supply, emergency preparedness, or a mixed solar catalog, send us the details and we'll recommend the right configuration and quote it.
Useful Information to Include
Target Market & Distribution Channel
Rural household, solar home kit, NGO supply, emergency retail, mixed catalog
Fan Size & Airflow Requirement
Fan size preference (8–16 inch) and airflow requirement
LED Wattage & Color Temperature
LED wattage and color temperature target for the integrated light module
Runtime Requirement
Hours of simultaneous fan + LED operation needed per charge cycle
Solar Panel Wattage or Target Landed Cost
Solar panel wattage preference or target landed cost per unit
Battery Chemistry Preference
LiFePO4 or Li-ion — affects cycle life, weight, and cost
Charging Method
Solar-only, solar + USB-C, or solar + AC adapter
Packaging & Branding Requirements
Private label, retail box, or bulk carton
Order Quantity & Reorder Frequency
Initial volume and expected reorder cadence for production planning
What You'll Receive
- Configuration recommendation matched to your runtime and cost targets
- Spec sheet for the relevant models in your size and battery range
- Quote based on your volume and requirements
If you're already sourcing solar lighting from us, we can consolidate your solar fan with LED light order into the same shipment.
Contact JXSOL
Explore More Solar Fan Products