Solar Driveway Lights Built for B2B Supply
IP65/IP67 weatherproof construction, CE and RoHS certified, 100% pre-shipment inspection. Standard models from 100 units; OEM/ODM with engineering review.
IEC 62124 · 13+ years solar lighting manufacturing
Solar Driveway Lights for Repeatable Outdoor Lighting SKUs
Solar driveway lights are self-contained, low-voltage outdoor lighting products that mark driveway edges, entrance lanes, villa access roads, and paved approaches without grid wiring or trenching. For distributors, landscape contractors, and project buyers, that means a simpler installation bill of materials, a lower total project cost, and a product category that sells on the strength of convenience and visual clarity rather than infrastructure.
We've been manufacturing solar-powered outdoor lighting since 2012, and solar driveway lighting sits inside our broader pathway and bollard range — a category we supply to buyers across North America, Europe, the Middle East, Southeast Asia, and Africa. The product format varies: surface-mounted edge markers, low post-style driveway lights, embedded paver lights, and compact bollard-style driveway fixtures each serve different channels and installation environments. This page covers the full format range, the specifications that matter for procurement comparison, and the customization options available for private-label and project orders.
If you have a target quantity, installation style, or market in mind, send us the details and we'll quote the right configuration.
Supply Regions
Product Format Selection Protects Your Margin
"Solar driveway lights" covers several distinct product formats, and the format you stock determines your landed cost, carton volume, damage risk, and customer expectation. Getting this wrong at the sourcing stage creates after-sales problems that eat margin.
Surface-Mounted Driveway Marker Lights
The most common retail and distributor SKU. Low-profile housing, typically 8–15 cm in height, mounts flush or near-flush to a driveway edge or border. Easy to ship, low damage rate in transit, and simple for end users to install.
This format moves well through e-commerce channels, outdoor lighting distributors, and landscape contractor supply accounts.
Low Post-Style Solar Driveway Lights
Sit 30–60 cm above grade on a ground stake or surface-mount base. More visible than flat markers, better suited for entrance lanes and villa community roads where the lighting needs to be seen from a moving vehicle.
These are the format most commonly specified in residential development and hotel entrance projects. We see the most OEM/ODM requests in this format — buyers building a branded outdoor lighting line usually want a post-style driveway light as a catalog anchor.
Solar Paver Driveway Lights
Embedded flush into paving, concrete, or compacted gravel. The housing must handle foot traffic and, in some configurations, light vehicle loads.
This format requires more installation planning and a stronger housing spec than decorative stake lights — buyers who source paver lights for vehicle-adjacent areas should confirm load rating and housing material before committing to a SKU. We'll cover that in the specification section.
Compact Bollard-Style Driveway Lights
40–80 cm tall, heavier housing, and typically used for commercial entrance roads, parking approaches, and resort driveways where a more substantial fixture is expected.
These overlap with our solar bollard range — if your project needs a taller, more prominent fixture, solar bollard lights for stronger vertical presence may be the better fit.
Consolidate Multiple Formats Under One Order
Each format has a different container loading density, carton protection requirement, and installation complexity. The right format for your channel is the one that matches your buyer's installation environment and your own logistics cost structure. If you're building a mixed-format driveway lighting line, we can supply multiple formats under one order — part of the reason buyers consolidate their solar lighting sourcing with us rather than splitting across suppliers.
Specification Checklist for Procurement Comparison
The table below covers typical configuration parameters for solar LED driveway lights across the formats we supply. These are industry-standard values for this product type — actual specifications depend on the model and configuration you select. Confirm exact values with us before finalizing a procurement comparison sheet or project proposal.
| Parameter | Typical Configuration |
|---|---|
| Housing material | ABS, PC, or die-cast aluminum (format-dependent) |
| Housing finish | Matte black, dark bronze, or custom RAL color |
| LED type | SMD LED, high-efficiency white |
| Lumen output | 10–80 lm (marker/paver); 80–300 lm (post/bollard style) |
| Color temperature | 3000K warm white, 4000K neutral white, 6000K daylight (selectable) |
| Solar panel | Monocrystalline silicon, 0.5W–3W (model-dependent) |
| Battery type | LiFePO4 or NiMH rechargeable (LiFePO4 standard on most current models) |
| Battery capacity | 600–2000 mAh (configuration-dependent) |
| Charging time | 6–8 hours full sun |
| Runtime (full brightness) | 8–12 hours typical; 3–5 nights autonomy in partial sun |
| IP rating | IP65 standard; IP67 available for paver and in-ground formats |
| Working temperature | -20°C to +60°C |
| Lighting mode | Dusk-to-dawn, motion-activated, or dual-mode (selectable) |
| Installation method | Ground stake, surface mount, or flush embed (format-dependent) |
| Certifications | CE, RoHS, ISO 9001:2015, IEC 62124 |
Specifications shown are industry-standard values for this product type. Actual specifications vary by model and configuration. Contact us for detailed product datasheets before finalizing procurement documents.
LiFePO4 Battery Standard
We switched the standard battery spec on most driveway light models to LiFePO4 from NiMH in 2021 because the cycle life difference is significant — 2,000+ cycles versus 500–800 cycles for NiMH.
For buyers selling into markets with hot summers or cold winters, that cycle life difference translates directly into fewer warranty claims in year two and three.
IP65 vs IP67 Guidance
IP65 covers rain and dust ingress for surface-mounted and post-style formats.
If you're sourcing solar paver driveway lights for in-pavement or near-drainage installation, specify IP67 — it handles temporary submersion and is the correct rating for any product that may sit in standing water after heavy rain.
Installation Choices That Affect Project Cost
Installation format is a sourcing decision, not just a setup instruction. The format you specify determines what your buyer needs on-site, what can go wrong, and what comes back as a warranty claim.
Spacing and Placement
Spacing and placement are the most common source of after-sales complaints in solar driveway lighting. A unit installed under a tree canopy or in a north-facing shadow zone will underperform regardless of battery capacity.
For buyers supplying landscape contractors or residential developers, we recommend including a spacing guide with the product — typically 1.5–3 meters between units for edge marking, adjusted for the lumen output of the specific model.
We can include a printed installation guide in the carton, in your language, as part of the OEM/ODM package.
Surface and Mounting Method
Surface and mounting method vary by format:
- Ground-stake models require soil or compacted gravel — they're not suitable for concrete or paved surfaces without an adapter.
- Surface-mount models need a flat, stable base and are the most versatile across installation environments.
- Embedded paver models require a pre-cut recess in the paving material and should be installed before the final paving layer is set.
Buyers supplying paving contractors should confirm the installation sequence before the product ships.
Drainage and Water Exposure
Drainage and water exposure matter more for driveway lighting than for most pathway products because driveways channel runoff. Surface-mounted units at the driveway edge will see more water exposure than units on a garden path.
IP65
Rain & splash
IP67
Temporary submersion
If your target market includes climates with heavy seasonal rain or buyers who install near drainage channels, specify IP67 and confirm the housing seal design before ordering.
Orientation and Solar Panel Angle
Orientation and solar panel angle affect charging performance. Most driveway light solar panels are fixed at a low angle optimized for mid-latitude markets.
For buyers supplying markets above 50°N or below 30°S, ask us about panel angle options or higher-capacity battery configurations to compensate for lower winter irradiance.
Before We Quote Your Project
The most useful information you can send is:
That information lets us recommend the right model and battery configuration rather than quoting a generic SKU that may underperform in your buyer's environment.
Get a Project QuoteMarket Segments Where Driveway Lighting Moves in Volume
Solar driveway lighting is not a single-channel product. The same core product family sells into several distinct commercial segments, each with different order patterns, margin logic, and reorder behavior.
Residential Development & Villa Community Entrances
The highest-volume segment for post-style and marker-style solar driveway lights. Developers building gated communities, villa estates, and managed residential roads specify driveway lighting as part of the landscape package — typically 50–300 units per project, with reorders as new phases open.
The buying decision is made by the landscape contractor or project procurement team, and the spec is usually driven by the developer's design standard. If you supply landscape contractors or residential developers, this is a segment where a consistent, reliable SKU with a clean installation record builds repeat business.
This segment has grown steadily for us over the past three years — buyers who got in early with a reliable driveway light SKU are now running annual reorders across multiple projects.
Hotel, Resort & Private Club Access Roads
A premium segment where housing quality and visual consistency matter more than unit price. Buyers typically specify a single model across the entire property — entrance lane, parking approach, garden road, and service access — so the product needs to look consistent and perform reliably across different installation environments.
Post-style and compact bollard-style formats are most common here. Order sizes run 100–500 units per property, with reorders for replacement and expansion.
Margin is higher than the residential development segment because buyers are less price-sensitive and more focused on product consistency and after-sales support.
Landscape Contractor Driveway Packages
A distributor-facing segment where the contractor buys a standard driveway lighting kit — typically 10–20 units per job — and installs it as part of a broader landscape project. The distributor's value is having a reliable, easy-to-install SKU that the contractor can recommend without worrying about callbacks.
Surface-mounted marker lights and low post-style lights are the most common format here. Volume builds through the distributor's contractor network rather than through single large orders.
Paving & Hardscape Contractors
A natural channel for solar paver driveway lights. These contractors are already working with the paving material and can install embedded paver lights as part of the job. The product becomes an upsell on an existing project rather than a separate purchase decision.
Order sizes are smaller per job but the contractor base is large and the reorder logic is strong — once a contractor has a reliable paver light SKU in their toolkit, they specify it on every eligible project.
Retail & E-Commerce Outdoor Lighting Lines
The highest-volume channel for surface-mounted marker lights and simple stake-style driveway lights. Buyers in this channel need consistent carton presentation, barcode labeling, retail-ready packaging, and a product that generates low return rates.
The margin model is different from project channels — lower per-unit margin, higher volume, and strong sensitivity to packaging quality and product consistency across batches. We supply several buyers in this channel with private-label driveway lighting lines, and the key requirement is batch-to-batch consistency in lumen output and housing color.
Building a driveway lighting product line or project bill of materials?
Send us your target market and volume — we'll recommend a starter SKU mix matched to your channel.
Get SKU RecommendationsCustom Options Without Losing Production Control
Most B2B buyers in this category need something beyond a standard catalog SKU — a private label, a specific color temperature, a custom carton, or a battery configuration tuned for their market's climate. Here's what we can do and where the practical limits are.
Housing Color & Finish
Standard options are matte black and dark bronze. Custom RAL colors are available on runs of 300 units or more — below that, the powder line changeover cost doesn't make sense for either side.
If you need a specific color for a branded product line, send us the RAL code and we'll confirm availability and MOQ.
Color Temperature
3000K, 4000K, and 6000K are standard options across most models. Mixed color temperature orders are supported.
If your market splits between warm-white residential and daylight commercial applications, we can pack both in the same order.
Lumen Output
Adjustable within the LED module's design range without changing the housing. Our in-house R&D team of 15+ optical and electrical engineers handles lumen output adjustment as part of the OEM/ODM engineering review.
Send us the requirement and we'll confirm what's achievable.
Battery Capacity
Upgradeable within the housing's physical constraints. For buyers supplying markets with shorter winter days or frequent overcast conditions — Northern Europe, the Pacific Northwest, parts of the Middle East — we typically recommend a higher-capacity battery configuration to maintain the rated runtime through low-irradiance periods.
This is a configuration decision we make during the engineering review, not a catalog option.
Lighting Mode
Dusk-to-dawn, motion-activated, and dual-mode (dim continuous with motion-triggered boost) are available on most models.
The controller firmware is configurable — if your project needs a specific mode sequence or sensitivity setting, we can adjust it.
Solar Panel Size
Upgradeable for markets with lower irradiance. If your target market is at high latitude or has a long rainy season, a larger panel is the most reliable way to maintain battery charge without increasing battery capacity.
We size the panel and battery together during the engineering review.
Packaging & Private Label
Custom carton design, logo printing, language-specific installation guides, barcode and SKU labeling, and accessory pack configuration are all available for OEM/ODM orders.
- Standard models from 100 units ship in our standard export carton
- Private-label packaging typically requires a minimum of 300–500 units per SKU to justify the setup cost
- Exact threshold confirmed based on your carton design complexity
Custom Configuration Process
For solar LED driveway lights with custom specifications, the process is straightforward: send us your target market, quantity, required runtime, preferred format, and any OEM/ODM requirements — we'll run an engineering review and come back with a confirmed configuration and pricing.
Standard catalog models are available from 100 units with no engineering review required.
Waterproof, Battery, and LED Checks Before Shipment
Driveway lighting fails in the field for predictable reasons. Water ingress through a poorly sealed housing joint. Battery cells that were never matched for capacity. Lumen output that varies between batches. Solder joints that crack under thermal cycling. We've seen all of these, and our production process is built around preventing them.
Water ingress through poorly sealed housing joints
Mismatched battery cells causing premature pack degradation
Lumen output variation from uncontrolled LED binning
Solder joint cracking under thermal cycling
Three-Stage Inspection Sequence
Incoming Inspection
Covers solar panels, LED chips and modules, battery cells, controllers, housings, and fasteners — components are checked against spec before they enter the production floor.
In-Process Inspection
Runs at SMT assembly, LED module integration, battery pack matching, and controller function stages.
- Lumen output and color temperature confirmed at the assembly stage, not by sampling finished units
- Battery cells matched by capacity and internal resistance before pack assembly
- A mismatched cell is the most common cause of premature battery failure — invisible in a finished product until the pack starts degrading unevenly
Outgoing Inspection — 100%
Every unit, every carton, every accessory pack, every label — before the container is sealed. This adds time to the production schedule, and we've kept it as a non-negotiable since 2012 because catching a defective batch before it ships is cheaper than managing warranty claims after it arrives in your warehouse.
IP65/IP67 Verification
Waterproof structure inspection uses our own IP65/IP67 test equipment. The IP rating on the spec sheet is verified on our equipment, not assumed from the housing design. For solar paver driveway lights and in-ground formats, we run IP67 verification as a standard step because the installation environment is more demanding than surface-mounted products.
Certifications & Export Documentation
ISO 9001:2015
Quality Management
CE
European Conformity
RoHS
Hazardous Substances
IP65/IP67
Ingress Protection
IEC 62124
PV Performance
CE and IEC 62124 documentation, RoHS test reports, and IP test certificates are available with the order. For buyers importing into markets with specific documentation requirements, we provide the paperwork as part of the standard export package.
3-Year Warranty Support
The 3-year warranty support on our solar powered driveway lighting products is backed by this inspection process — not by a warranty policy document that assumes some percentage of returns. Learn more about our manufacturing and inspection capabilities.
Export Documentation and Channel-Ready Packing
Getting the product to your warehouse in good condition, with the right paperwork, is as much a part of the sourcing decision as the product spec itself.
Certifications and Documentation
CE Declaration of Conformity, RoHS test reports, IP65/IP67 test certificates, and ISO 9001:2015 quality management documentation are available for all standard solar driveway lighting models. IEC 62124 covers the photovoltaic performance requirements relevant to solar-powered products in regulated markets.
For buyers importing into the EU, North America, or markets with restricted substance requirements, these documents are provided with the order — not on request after the goods arrive.
CE Conformity
RoHS Reports
IP65/IP67 Certs
ISO 9001:2015
IEC 62124
Export Packing for Solar LED Driveway Lights
Inner Box Options
Individual units packed in retail-style inner boxes or plain export boxes depending on your channel requirement. Accessory packs (ground stakes, mounting hardware, installation guides) checked against a packing list before carton sealing.
Container-Optimized Cartons
Master cartons sized for standard 20GP and 40HQ container loading. Carton dimensions planned for container efficiency, not just product protection. Batch codes printed on carton labels for traceability.
Transit Damage Prevention
Internal dividers and foam protection for fragile components — solar panels and LED lenses are the most vulnerable points. Master carton configurations designed to eliminate the most common transit damage patterns in small outdoor solar lighting.
Channel-Specific Packing Configurations
E-commerce & Retail
Retail-ready packaging with product photography panels, barcode labels, and language-specific installation guides.
Project Buyers
Plain export cartons with packing list documentation. Standard configuration for commercial and municipal project orders.
Private-Label / OEM
Custom carton design and logo printing available. Confirm requirements during the OEM/ODM engineering review.
Had Transit Damage With a Previous Supplier?
Transit damage is the most common complaint in small outdoor solar lighting, and it's almost always a carton protection issue rather than a product defect. If you've experienced breakage on solar panels or LED lenses, send us a photo of the damage pattern and we'll show you how our carton is configured differently.
Request Private-Label Packaging QuoteChoose the Right Product in the Pathway and Bollard Range
Solar driveway lights are one format inside a broader outdoor pathway and bollard lighting range. If the driveway light format doesn't match your project or channel, here's where to look.
Solar Pathway Lights
Garden paths, pedestrian walkways, and landscape borders where the lighting is for foot traffic rather than vehicle-adjacent marking. Lower housing profile, more decorative format options, and typically lower lumen output than driveway lights.
Solar Walkway Lights
Pedestrian access lanes, campus paths, and park walkways where consistent spacing and reliable runtime matter more than decorative appearance. A practical, repeatable SKU for landscape and municipal buyers.
Solar Bollard Lights
Commercial entrances, parking lot perimeters, and resort access roads where a taller, more substantial fixture is expected. If your project needs a fixture that reads as a permanent installation rather than a landscape accent, bollard lights are the right format.
Solar Post Top Lights
Decorative perimeter lighting mounted on existing posts, pillars, or fence posts. A good fit for buyers supplying gated community entrance columns or decorative perimeter lighting projects.
Solar Fence Lights
Fence-mounted boundary lighting for residential perimeters, garden walls, and property edges. Different installation format from driveway lights but often specified in the same project.
Solar Deck Lights
Stair risers, deck edges, and railing-mounted lighting. If your buyer's project includes both driveway lighting and deck or stair lighting, we can supply both from the same order.
Not sure which format fits your project or channel?
Browse the full range or send us your project description — we'll recommend the right product mix.
FAQ for Solar Driveway Light Buyers
What IP rating should solar driveway lights use for outdoor projects?
IP65 is the minimum for any outdoor solar driveway light. It covers rain, dust, and splash ingress — sufficient for surface-mounted and post-style formats installed at driveway edges.
For solar paver driveway lights installed flush with paving, near drainage channels, or in areas that collect standing water after rain, specify IP67. IP67 handles temporary submersion up to 1 meter for 30 minutes, which is the correct rating for any product that may sit in pooled water.
Don't accept IP44 or IP54 for outdoor driveway applications — those ratings are for sheltered outdoor use, not exposed driveway environments.
Rain, dust, splash protection at driveway edges
Submersion up to 1 m for 30 min — pooled water safe
Are solar paver driveway lights suitable for vehicle areas?
It depends on the housing material and load rating. Standard decorative paver lights with ABS or PC housings are rated for foot traffic only — they will crack under vehicle loads.
For vehicle-adjacent or vehicle-crossing applications, you need a paver light with a die-cast aluminum or reinforced housing and a confirmed load rating, typically 1–5 tonnes depending on the application.
Always confirm the load rating with us before specifying solar paver driveway lights for driveways where vehicles will cross over the units.
We've seen buyers source decorative paver lights for vehicle driveways and then deal with cracked housings within the first season — it's a spec mismatch, not a product defect.
| Housing Type | Load Rating | Application |
|---|---|---|
| ABS / PC (decorative) | Foot traffic only | Garden paths, pedestrian zones |
| Die-cast aluminum / reinforced | 1–5 tonnes | Vehicle driveways, parking areas |
How far apart should solar driveway lights be installed?
For edge marking along a driveway, 1.5–3 meters between units is the standard range. The right spacing depends on the lumen output of the specific model and the width of the driveway.
Spacing guidance by light type:
- Higher-lumen post-style lights — can be spaced further apart due to wider throw
- Low-lumen marker lights — need closer spacing to maintain visual continuity
- Entrance lane lighting (vehicle guidance rather than edge marking) — 2–2.5 meters is a common specification
We include a spacing recommendation in the installation guide. If you need a custom spacing guide for a specific project, send us the driveway dimensions and we'll provide one.
What battery configuration is suitable for cloudy or rainy markets?
For markets with frequent overcast conditions — Northern Europe, the Pacific Northwest, parts of Southeast Asia during monsoon season — the standard battery configuration may not maintain the rated runtime through extended low-irradiance periods.
Two levers for cloudy-market optimization:
Extends the number of nights the product can run without a full recharge.
Improves charging efficiency on low-irradiance days.
Recommended configuration for most cloudy-market applications:
- Higher-capacity LiFePO4 battery: 1500–2000 mAh for marker-style lights, 3000+ mAh for post-style
- Panel sized 20–30% larger than the standard configuration
Send us your target market location and required runtime and we'll specify the right configuration.
Can JXSOL customize solar driveway lights for private-label orders?
Yes. Custom options include housing color (RAL, 300+ units), color temperature (3000K/4000K/6000K), lumen output adjustment, battery capacity, lighting mode, solar panel size, packaging design, logo printing, language-specific installation guides, and barcode/SKU labeling.
Standard Catalog Models
Available from 100 units with no engineering review.
OEM/ODM Orders
Custom specifications go through an engineering review before production to confirm the configuration and lock the spec.
Most OEM/ODM buyers in this category start with a 2-unit sample order to test the product with their own customers before committing to a production run.
What MOQ and order information are needed for a quote?
Standard catalog models: MOQ 100 units. For a quote, send us:
- Product format (marker, post-style, paver, or bollard)
- Target quantity
- Color temperature
- IP rating requirement
- Market or destination country
- Whether you need standard export packing or private-label packaging
OEM/ODM orders: send the above plus any custom specification requirements — housing color, lumen target, battery configuration, panel size, and packaging design. We'll run an engineering review and come back with a confirmed configuration and pricing.
Typical response time is within 24 hours for standard catalog inquiries.
Quote Solar Driveway Lights With the Right Configuration
Send us your project or order details and we'll come back with a configuration recommendation and pricing. The more specific you are, the more useful our response will be.
Useful Information to Include
-
Product format Surface-mounted marker, post-style, paver, or bollard
-
Target quantity
-
Installation surface and mounting method
-
Required daily runtime and lighting mode
-
Color temperature preference
-
Market or destination country For certification and climate configuration
-
Packaging requirement Standard export, retail-ready, or private-label
-
OEM/ODM requirements Logo, custom color, custom spec
Order Programs
Standard catalog models are available from 100 units.
OEM/ODM programs with custom specifications include an engineering review at no charge — we confirm the configuration is achievable before production starts.
Contact JXSOL
-
Email sales@jxsol.com
-
Phone / WhatsApp +86 153 9880 7118
-
Address 9th Floor, Houda Industrial, No. 65 Pinghe Road, Guzhen Town, Zhongshan, Guangdong, 528421, China